Welcome- To ask questions or to view help information about GMRS two-way radio gear, you must register (it's free) before you can post or view!…thank you!!

What else will i need for this board to work and will i need internet for the board to work??

Here is where you will find FAQ's/help/setup and information on the Bridgecom two-way radio repeater interface board
Locked
User avatar
Gambler
Site Admin
Posts: 360
Joined: Tue Mar 14, 2023 12:18 pm
Location: Wisconsin
Contact:

What else will i need for this board to work and will i need internet for the board to work??

Post by Gambler »

You need a computer cause the software that is used is windows base 9 an older computer Windows 8 or higher should work just fine), and You will also need a USB to DB9 adapter AND a sound card if the sound card in your computer works then you can plug the cable into that, you may need an adapter if your computer only has ONE jack on it. If your computer sound card OR the jacks are bad, then you will need a USB sound card!

If you want Zello and weather announcements to work, then yes, you will need internet access. For date & time and repeater ID, you do NOT need internet for that to work!

NOTE: I recommend getting the USB sound card!! I have a brand new (cheap) laptop and the built-in sound card is not very good for this!!

Here are the links to the items that are need:

CH340 type USB to RS232 COM Port Serial PDA 9 Pin DB9 Adapter (Compatible with Windows 11*,10, 8.1,8,7,Vista, XP,2000,9x,Server 2022,2019,2016,2012,2008,2003)
https://www.ebay.com/itm/323921914851?h ... R76Wz6XnYQ

USB 2.0 External 7.1 Channel 3D Virtual Audio Sound Card.
https://www.ebay.com/itm/114143807052?h ... R5yizabnYQ
Locked

Return to “Bridgecom two-way radio repeater interface board setup/help”