just like the other interface board it should!!
This is a raspberry PI 3b+ image file for the GMRS two-way radio interface board it has/needs the following:
1). Wireless WIFI will NOT work! Not even with a USB to WIFI card due to it needs a windows 10 ARM driver! The ethernet connector does work for internet!!
2). USB to DB9 adapter MUST be FTDI chipset type! any other cables will NOT work!! the FTDI driver is already installed!! The cable I use is this one: https://www.ebay.com/itm/151280818541
3). Com port sharing software is not installed because I can't find a version that will work with windows 10 ARM! so this means ONLY ONE program that uses com ports can run at a time!! you can NOT run 3 programs at once!!
4). Windows 10 home is NOT activated you will need a key if you want to remove certain limitations of functionality ( i don't think that is need for what we are going
to be using it for). This is why it will say "test mode" in the right hand corner!
5). This image is for a 16GB mircosd card!! smaller mirco sd card size will not work! BEST to use one that has fast read and write speed a number called a class 10 on the card will mean this!
6). This would run much faster using a raspberry 4 with more ram memory!! This image file SHOULD work with that, but i have NOT tested this yet! if i get one I can test it or make a image that will work with the raspberry 4!
7). Program that is used to write this image to a 16GB mircosd card is https://win32diskimager.download/ how to use it watch this video https://youtu.be/ivb0FRXBb04?si=yAWuiwozSC5Kj2vT
8). The windows version that is install is windows 10 ARM home build 18362.19h1 release 190318-1202
9). Programs that are installed are Zello,Date & time/weather, Repeater ID (simplex repeater software). You can pick which ONE you want to run, you will need your own WAV sound file! also Anydesk ( remote computer access software info here https://anydesk.com/en ) is also install this can run along with one other program!
10). Zello, Anydesk and weather announcements will need internet to work!! time & date, Repeater ID (simplex repeater software) does NOT need internet to work!
11). USB sound card will have to be used!! the built in sound card on the rasepberry maybe not work!! The one i use is this one https://www.ebay.com/itm/274125100662
12). Desktop shortcuts to sound card setting and zello.config file to make it easier to edit zello to get into gateway mode!
13). For more information on the GMRS two-way radio interface board or GMRS two-way radio help/FREE software visit: https://www.gmrstwowayradio.com and Youtube channel https://www.youtube.com/@GMRStwowayradio
Link to download Windows 10 home img file for raspberry 3b+ for interface board!! You will need to unzip it using WinZip!!!!
https://www.gmrstwowayradio.com/win10_P ... _board.zip
YouTube video showing this working:
https://youtu.be/yUJqhwW_wPo
if you find a com port sharing software and a USB WIFI that works please let me know send me an mailto:[email protected]
Thanks
Welcome- To ask questions or to view help information about GMRS two-way radio gear, you must register (it's free) before you can post or view!…thank you!!